Skip to content

How do we measure surface texture?

In the past surface texture has been assessed by the judgement of the inspector either by eye or even fingernail. In order to put a number to the surface texture, we need to use a more accurate means of measurement. A typical surface measuring instrument will consist of a stylus with a small tip (fingernail), a gauge or transducer, a traverse datum and a processor. The surface is measured by moving the stylus across the surface. As the stylus moves up and down along the surface, the transducer converts this movement into a signal which is then exported to a processor which converts this into a number and usually a visual profile.

For correct data collection, the gauge needs to pass over the surface in a straight line such that only the stylus tip follows the surface under test. This is done using a straightness datum. This can consist of some form of datum bar that is usually lapped or precision ground to a high straightness tolerance. On small portable instruments this is not always a good option and can add to the expense of the instrument. In these cases, it is possible to use an alternative means of datum. This is a skid.

Surface Textue Measurement Instrument