      |
| Surface Finish and Form Measurement | ||||||||||||
 |
||||||||||||
 |
 |
|||||||||||
| Surtronic
Duo Surtronic 25 Form Talysurf Intra Form Talysurf Inductive Form Talysurf PGI 1240 Form Talysurf PGI |
Talysurf
CLI Systems Talysurf CCI Systems Talyseries Roughness µltra Software Talymap Software |
 |
roughness | |
aspherics | |||||||
| waviness | |
dimensioning | ||||||||||
|
||||||||||||
| form | |
tolerancing | ||||||||||
|
||||||||||||
| contour | |
2D analysis | ||||||||||
|
||||||||||||
|
step height | |
3D analysis | |||||||||
 |
||||||||||||
 |
|
 |
| Form Talysurf PGI 2540 | ||
High-resolution Aspherics Measurement System. |
||
|
||
| Aspheric Analysis The Form Talysurf PGI 2540 is supplied with Taylor Hobson’s dedicated Aspheric Analysis Software. This provides analysis of aspheres up to 20th order. Key features of the software include: • SAG table generation at user-defined x intervals • Derived coefficients analysis • Astigmatism analysis • Base radius optimization Asphero-diffractive Analysis (optional) When combined with the results of the Aspheric Analysis software, the Diffractive Analysis software allows the residual diffractive form to be analysed and the underlying form error to be visualized. Numerical results include overall Pt, measured zone height, zone height error and zone half-diameter. Key features of the software include: • Visualisation of form error after removal of diffractive design • Clear indication of zone transitions • Zone parameters can be exported to a CSV file for further analysis • Designs can be saved and restored easily. |
||
|
|
|
 |
||||||
 |
 |
roughness | |
|||
|
waviness | |||||
|
form | |||||
|
contour* | |||||
|
3D analysis* | |||||
|
aspherics* | |||||
| *software accessory | ||||||
 |
||||||
