Our website uses cookies to deliver to you the best possible experience.

If you continue to browse the site, we will assume that you are happy to receive cookies from the Taylor Hobson website. To learn more about Cookies click here.

USA Canada & Mexico

Step height

The accurate and repeatable measurement of step height is necessary for many hi-tech applications.

MEMS & nanotechnology

Micro Electro-Mechanical Systems are being used today for numerous applications including pressure and acceleration sensors, micro mirror display devices and micro fluidic pumps.

Laser etch measurement

Laser etching is one of the predominant methods used for the identification marking of integrated circuits.

Epitaxial wafers

Due to the expansion in the use of electro-optical components that are now common place in both telecommunications and display technologies, epitaxy is emerging as a key technique for component production.

IC package measurement

Backend process measurement is important for controlling the final quality of the IC package. Problems in IC packaging can cause connection issues when the device is soldered, detaching of wire bonds or bump on chip contacts and increased stress to be placed on the circuits of the IC.

Step height

The accurate and repeatable measurement of step height is necessary for many hi-tech applications. Taylor Hobson provide a range of instrument designed to meet the very highest requirements for step height measurement. Covering ranges of step height from sub-nanometer to millimetre with repeatability below 0.1 nm.

 

Metrology

3D Step Height
Provides the height difference between two planes defined by two areas on a surface. The first area is defined as the reference and the software fits a least squares plane through this area. The second plane is then measured from this. As well as mean step height, maximum height and minimum height, the angle difference is also measured.

2D Step Height
Provides a method of measuring step height for simple geometric shapes such as etched lines or rectangular areas. 2D step height can also be used for measuring thickness where an edge is exposed.

ISO 5436-1 Step Height
When attempting to compare measurements of step height taken on different measurement instruments it is very important to comply to a standard method of measurement. ISO 5436-1 provides an internationally recognised method of measuring step height. The above instruments all support this standard.

 

More Information      

MEMS & nanotechnology

Micro Electro-Mechanical Systems are being used today for numerous applications including pressure and acceleration sensors, micro mirror display devices and micro fluidic pumps. MEMS devices extend the fabrication techniques used by the integrated circuit industry to create mechanical elements such as gears, diaphragms and connecting beams. Accurate measurement of all these elements is critical to meet the demand of mass producing low cost high quality MEMS devices.

 

Metrology

Roughness
Accurate measurement of roughness within MEMS devices allows surface interactions to be controlled, whether they are solid to solid interactions as in micro gear systems or solid to liquid as found in micro fluid pumps.

Step Height
monitoring step height of MEMS devices is an important indicator of performance. Along with lateral dimension information step height gives a good approximation of mass which affects the fundamental oscillating frequency of the individual elements in the device.

Lateral Dimensions
lateral dimensions are particularly important when characterising micro gears and fluidic systems. Accurate measurement of volume and surface area as well as critical dimensions such as beam widths all help control the performance of the final device.

 

More Information      

Laser etch measurement

Laser etching is one of the predominant methods used for the identification marking of integrated circuits. This is partly due to the fact that laser marking is a tamper proof method of identification. Tamper proof marking has helped greatly reduce IC fraud, the selling of IC is for higher speeds and specifications than they were produced for.

 

Metrology

Step Height
As IC packages have become smaller and thinner the requirement for measuring step height of laser etching has become more important. The target depth of the laser etch is defined by two requirements. Firstly, it must be deep enough to provide tamper proof marking that can be read by IC identification systems and secondly, it must be shallow enough not to damage the circuits on the chip.

Roughness
The surface finish of the etched mark is an important factor in the easy reading of the final identification, whether by machine or human eye. The rougher the surface, the more light that is scattered and this increases the contrast of the mark to its surrounding surfaces.

 

More Information      

Epitaxial wafers

Due to the expansion in the use of electro-optical components that are now common place in both telecommunications and display technologies, epitaxy is emerging as a key technique for component production. Epitaxy is the process of depositing very thin layers of semiconductor materials onto the surface of a single crystal substrate. Each crystal layer is known as an epilayer.

 

Metrology

Surface Roughness
Surface texture is a vitally important parameter in specifying the quality of epitaxial semiconductors for both customers and suppliers. With the current drive for ever smaller circuits to be printed on wafers, the tolerances for roughness are becoming tighter. Surface finish for epiwafers is specified in nm, this requires a system with very low noise and high resolution be used to measure them.

 

More Information      

IC package measurement

Backend process measurement is important for controlling the final quality of the IC package. Problems in IC packaging can cause connection issues when the device is soldered, detaching of wire bonds or bump on chip contacts and increased stress to be placed on the circuits of the IC. For these reasons it is important to control not just the geometry of the die, but also the flatness of the die seating area, the step height between the attachment points on the die and the package and the roughness of the wire bond attachment areas.

 

Metrology

Flatness
Matching the flatness of the die with that of the die seating area is important to reduce stress placed on the IC during the packaging process and throughout the operation of the device. Controlling the flatness of the overall package is also necessary to ensure correct placement of the IC and good electrical contact being made when soldered.

Roughness
The surface finish of the die seating area needs to be controlled to ensure good adhesion when the die is attached. Also the roughness of the wire bond attachment areas is important for good electrical conductivity and wire attachment security.

Step Height
There are many application for step height on the IC package. From the measurement of balls, bumps and leads to the package geometry itself including depth of the die seating area.

 

More Information