Our website uses cookies to deliver to you the best possible experience.

If you continue to browse the site, we will assume that you are happy to receive cookies from the Taylor Hobson website. To learn more about Cookies click here.

Stories

Talyrond 450

Designed for the powertrain and machine tool industries this instrument utilises a rotating gauge head mounted on a vertical straightness unit, the rotating head allows manufacturers to measure roundness of prismatic or non rotationally symmetric components such as engine blocks, crankshafts, cylinder heads and many more.

Talyrond 565/585XL

These systems are extremely popular in the measurement of lage diameter bearings and non-rotationally symmetric components.

Talyrond 450

Designed for the powertrain and machine tool industries this large capacity roundess tester utilises a rotating gauge head mounted on a vertical straightness unit, the rotating head allows manufacturers to measure roundness of prismatic or non rotationally symmetric components such as engine blocks, crankshafts, cylinder heads and many more.

The solid cast iron base frame and column surround ensure stability during measurement while the high precision spindle and vertical straightness unit ensure repeatable and reliable measurement of roundness, cylindricity and straightness.

A high load capacity X,Y table with fully automated centre and level ensures precise set up and repeatability between operators. The entire system is completely automated utilising Taylor Hobson's Ultra software, this software has many features ensuring measurement and analysis to national and international standards.

  • Fully Automated Centre and level capability
  • 1000 kg load X,Y table with high accuracy position control
  • High accuracy spindle with large load capacity for special deep bore drop arms
  • Straightness, parallelism and cylindricity measurement up to 1.5 metres
  • Column heights of up to 2000 mm
  • Windows based Ultra software with measurement traceable to national and international standards

Talyrond 565/585XL

These systems are extremely popular in the measurement of lage diameter bearings and non-rotationally symmetric components. The system is based around Taylor Hobson's popular Talyrond 500H range and utilises a frictionless air bearing spindle and high accuracy column with adjustable positioning to allow measurement of bearings up to 1 meter in diameter.

This roundness tester has features such as fully automated centre and level and automatic gauge calibration, these features greatly reduce measurement and set up time thus increasing throughput.

The systems come in two types, either with fully automated arm attitude/orientation or a manually operated version, in both cases these patented mechanisms provide access to the most difficult of components.

  • Fully automated centre and level capability with radial follow mode
  • Automatic gauge calibration
  • Patented arm attitude/orientation mechanism with choice of automated or manual
  • Vertical straightness units of up to 1200 mm
  • Large diameter range with adjustable column and 300 mm radial arm
  • Windows based Ultra software with measurement traceable to national and international standards
Date Article Title   Description
18/07/17 Cut-offs and the Measurement of Surface Roughness   The mathematical definition of Surface Roughness parameters is very strictly...
03/05/17 Smart manufacturing from Taylor Hobson   Visit us at Control 2017, Hall 4, Stand 4502, 09. - 12. MAY 2017 Stuttgart...
21/02/17 The New Intra Touch Contour   The new instrument also supports both high resolution and wide range...
28/01/17 Increase productivity and quality with the Surtronic® R-100 Series  
23/01/17 New 44 page product solutions brochure from Taylor Hobson   The new 44 page Innovation Brochure from Taylor Hobson has everything you...
15/12/16 Ball bearings - Talyrond® contact and non-contact measurements   Comprehensive measurement - Ball form, radius and surface finish
09/12/16 Groundbreaking analysis technique for ball screws and lead screws   Critical measurements for design and production
09/11/16 Roller Bearings - new contact and non-contact solutions   Compare measured profiles to your unique design data...
01/11/16 Updated Talyvel 6: New software and simple ON/OFF pendulum clamp   Talyvel 6 is now supplied with new, icon driven operating software giving a...
28/10/16 Advanced Harmonic Standard – for traceable results  
07/10/16 Taylor Hobson unveils the new LuphoScan 260 HD, taking precision measurement of optical surfaces to the next level  
02/09/16 Q-Link - the latest addition to our powerful Ultra software!   Q-link is a new production and advanced SPC software interface offering...
18/08/16 Optic product solutions from Taylor Hobson   the experts in automotive, bearings and optics metrology
21/06/16 Delivering measurement integrity through manufacturing excellence   Taylor Hobson continues their philosophy of investing in the latest...
08/06/16 Form Talysurf Intra - low cost contour, waviness and roughness...   The ideal instrument for precision shop floor applications

Page 1 of 12  > >>